Product introduction
Product introduction
Frame structure:
The frame structure adopts the concept design of no cold bridge, which is not easy to produce condensate water; The insulation performance of the housing can meet the requirements specified in EN 1886 T2/TB2 standard; The internal surface of the unit is smooth and smooth, and there is no bulge around the bottom due to the structure. It is not easy to accumulate dust, which is suitable for the use of purification system. Skeleton and panel adopt double sealing design, and the inner sealing rubber is hollow design. With positive and negative pressure follow up, whether positive pressure or negative pressure has self-compression function; The panel is fixed on the frame by bolts, firm and reliable; In order to avoid corrosion of the surface of the galvanized panel by wet air, the edge of the galvanized panel is placed inside the frame after bending, and does not contact with the air flow; Box section adopts external design to avoid unnecessary bulge and clean dead Angle inside the box; Operating temperature range :-40 ~ 90℃ Fire grade: polyurethane panel flame retardant B, rock wool panel flame retardant A.
Panel:
Double-layer sandwich sandwich structure, panel around the use of special aluminum profile, excellent heat insulation performance;
The inner panel is strengthened by bending so that the panel has strong strength;
With a certain flame-retardant foam material, foam density of 48kg/m³, can effectively prevent cold transfer;
The standard match is the outer color steel plate, the inner layer of galvanized steel plate, galvanized steel plate edge cutting edge does not contact with the air flow, prevent the incision rust, can also be selected according to the requirements of stainless steel plate;
The thickness is 50mm and the operating temperature range is -40 ~ 90℃.
Rockwool panel:
Double sandwich sandwich structure, inside and outside the panel after bending spray treatment, the panel appearance is beautiful;
Durable, inorganic glass steel material has special properties, tough surface, bearing up to 350 kg or more;
Excellent wind resistance and impact resistance; High temperature resistance, acid and alkali resistance, corrosion resistance, anti-aging and other advantages; It has solved technical problems such as rehalide and frost, and its service life can reach more than 30 years.
Should have a high absorption coefficient; Excellent fire resistance;
Condensate pan:
Dry design, no water;
The water tray has a drainage slope, condensate water flows to the outlet;
Stainless steel with insulation on the bottom.
Fan:
The Plug Fan is selected to drive the volute fan directly.
Cold rolled steel coated wind wheel material, anticorrosive;
Connection mode: Fan and motor are fixed on the same bracket. Using rubber or spring shock absorption;
Drive: direct drive, fan impeller directly installed on the motor shaft;
Motor: fully enclosed air-cooled frequency conversion motor;
Advantages: Avoid extra dust from belt wear.
Filter:
Filter material meets the technical requirements of VDI 6022;
Closed hole type sealing material, non-hygroscopic;
Filter can be easily and quickly disassembled and installed;
The filter section can be equipped with differential pressure meter or differential pressure switch for filter resistance detection.
Optional heating device or preheating device heating filter section to meet the requirements of high humidity occasions.